|
|
Build Your Online Product Catalogs?
| Product Name: |
1.2714 L6 tool steel die steel special steel mould steel forged
|
| Supply Ability: |
60,000mt |
| Related proudcts |
special steel, tool steel, die steel, |
| Specifications |
DIN 1.2714 |
| Price Term: |
FOB/CIRF/CFR/EXW |
| Port of loading: |
Shanghai,Wuhan,Huangshi,Shenzhen |
| Minimum Order |
5-10mt |
| Unit Price: |
|
|
Product:1.2714,L6
Key words:tool steel,die steel,specialty steel,steel bar,hotwork,coldwork,forged bar,alloy tool steel,flat bar, round bar,
Typical Analysis:
C : 0.65-0.75
Si : 0.10-0.50
Mn: 0.25-0.80
P : Max 0.030
S : Max 0.030
Cr: 0.60-1.20
Mo: Max 0.50
Ni: 1.25-2.00
Similar Grades:DIN 1.2714, GB/T 5CrNiMo
Advantages:
Good toughness at lower hardness lever.
Good wear at high hardness lever.
Application:
L6 was designed for general purpose tools where greater toughness is required, such as forming rolls, punches, blanking dies, shear blades,and spindles.
Machinability:
L6 has a machinability rating of 85% of a 1% carbon tool steel.
Annealing:
L6 should be annealed at 1400¡ãF and held for one hour per inch of thickness. Cool at 20¡ãF per hour to 900¡ãF and then air-cool. A maximum hardness of 217 Brinell should be obtained.
Hardening:
L6 should be preheated to 1200¡ãF then heated to 1500¡ãto 1550¡ãF and held for one hour per inch of thickness. Quench in oil to 150¡ãF followed immediately by tempering. L6 can also be air quenched in sections less than 1" thick.
|
| Company: |
Huizhou Xing Ye Special steel Co., Ltd.
|
| Contact: |
Ms. Q W |
| Address: |
2820,Yiwu Mansion,Huizhou Avenue |
| Postcode: |
516000 |
| Tel: |
86 752 7777039 |
| Fax: |
86 752 7777009 |
| E-mail: |
|
|
|
|
Home
